Case · How to get rid of it

Soft wash vs pressure wash on a roof: what is the difference?

The ruling

A roof treatment is the one that stays on: applied at low pressure and left to soak into the growth where it is anchored. A soft wash sprays bleach on and rinses it off within minutes, and bleach cleaners are sold for algae, moss and mould, not lichen. A pressure wash strips growth off, and tile surface with it.

Three different jobs under two names

"Soft wash" gets used loosely for anything gentler than a pressure clean, and that hides a real difference. There are three ways growth gets dealt with on a roof, and they work on different principles.

  • Pressure wash: force. A jet of water at high pressure lifts the growth, and the surface it is anchored to: Marley, a UK tile maker, says high powered jet washes "can damage the surface of the slate or tile".1 Monier, who make roof tiles, "strongly advises against the use of pressure washers for roof cleaning".2
  • Soft wash: chemistry, briefly. A bleach solution is sprayed on at low pressure, left for a few minutes, then rinsed off.
  • Treatment: chemistry, left to work. A biocide is applied at low pressure at the label rate and left on the roof. Nothing is rinsed. The weather does the removal.

What a pressure wash does to tiles has its own file: does pressure cleaning damage roof tiles. This one is about the other two, and why only one of them is built for lichen.

In plain terms A pressure wash is a scrubbing brush, a soft wash is a soak and a rinse, and a treatment is the spray you put on weeds and walk away from.

What a soft wash is

A soft wash runs on sodium hypochlorite, the active ingredient in household bleach. The asphalt roofing makers in the US say discolouration "may be lightened" with a solution of household bleach and water, "gently dispersed" on the roof, left "for at least 15 minutes but no more than 20 minutes", then rinsed off gently, and never with a power washer or a broom.3 BlueScope's cleaning advice for its Colorbond steel roofs is a 2 percent sodium hypochlorite solution, applied with a soft bristle broom, left for 3 to 5 minutes and washed off with plenty of fresh water.4

The bleach based outdoor cleaners at the hardware store work the same way. 30 Seconds Outdoor Cleaner Concentrate contains sodium hypochlorite, and the maker's own instruction is "Spray, Scrub, Rinse".5

In plain terms It is soaking a stained shirt before you wash it. The soak does the work, then it all goes down the drain.

What bleach does to growth, and to lichen

Bleach lightens most biological staining. Roofing researchers at Lawrence Berkeley National Laboratory call fresh bleach a useful test for growth: soot and rust are little affected, while most biological stains lighten.6 BlueScope describes the same spot test for fungus on its steel.4 So a soft washed roof looks lighter on the day.

Lightening a stain is not the same as ending what made it, and on lichen the maker of one bleach cleaner says so plainly. 30 Seconds sells its Outdoor Cleaner for algae, moss, mould and mildew, and to the question "Does 30 SECONDSĀ® Outdoor Cleaner treat lichen?" its answer is "No. Please use 30 SECONDSĀ® Spray & Walk Away to treat lichen."5 Spray & Walk Away works the other way: "you don't scrub or rinse off Spray & Walk Away", it works on lichen "over time", and the rain does the rinsing.7

What matters is where lichen lives. A crust lichen is firmly attached to the surface across its entire underside8, and its threads grow down into the surface and anchor it very tightly.9 On clay roof tiles six to ten years old, electron microscopy found lichen threads penetrating the tile and filling its fissures and cracks.10 A soft wash is on the roof for minutes, then rinsed away. A treatment made for lichen stays on, so it has time to soak into the growth where it is anchored. What lichen does to a tile while it is there is in does lichen damage roof tiles.

In plain terms Bleaching the leaves of a weed makes it look dead. Lichen holds on by its threads in the tile, the way a weed holds on by its root, and that is where a treatment has to work.

What it does to the roof, the garden and the gutters

A soft wash is much gentler on a tile's surface than a pressure clean, because nothing is blasting it. The risks are chemical, and they land wherever the rinse goes.

  • Metal and paint. The maker of one bleach cleaner says to "Avoid cleaning untreated metals, powder coated surfaces, high gloss paintwork and fabric due to possible corrosive, dulling and bleaching effects".5
  • Plants. The same cleaner's directions say to rinse surrounding plants and grass with clean water before and after use, and not to let the spray or the rinse touch the foliage of plants you want to keep.5
  • Tanks. BlueScope says care must be taken that no hypochlorite solution is washed into a water tank.4 How tanks and roof work fit together is in rainwater tanks and roof treatment.

In plain terms Everything that goes onto the roof in a soft wash has to come off again, and it comes off into your gutters and onto your garden.

How a treatment differs: it stays on

A roof treatment is built the other way round. It is applied to a dry roof and deliberately not rinsed. 30 Seconds' roof product says to spray it onto a dry surface and "DO NOT RINSE OFF".11 The Yates Surrender label says to "Spray to just wet" on tiled roofs, and not to apply it if rain is expected within 12 hours.12 Both are benzalkonium chloride, a quaternary ammonium compound, and both are made for lichen: the Surrender label gives 500 g/L benzalkonium chloride "for control of moss, algae, lichen and liverwort", including on roofs, and the 30 Seconds roof concentrate is "For the removal of Lichen, Moss, Mould & Algae from exterior surfaces".12, 13

Because it stays on, it has time to soak into the growth where it is anchored. Nothing comes off on the day. Yates says it plainly about Surrender on roofs: it "kills lichens on roofs but does not remove them", and they can be left to weathering.14 The dead growth loosens and washes away over the following months, which is why a treated roof looks the same when we leave. How that works is in how roof treatment works, and how long it takes is in how long roof treatment takes to work.

That is how we apply UNGROW Bailiff, our treatment. Bailiff's active is benzalkonium chloride. It is mixed on the day to the label rate, measured to the roof's area, applied from the roofline to every face, and left to work. We put it on with soft wash equipment, a low pressure pump through non-directional nozzles, so nothing is blasted off the tile or forced under tiles or laps. What goes through the pump is the difference: a treatment that stays on, not a bleach that is rinsed off.

In plain terms A soft wash is a wipe. A treatment is the spray you put on the weeds in the path and leave, and the path clears as they die back.

Side by side

Pressure wash Soft wash Roof treatment
How it works Force of water Bleach solution, a few minutes, rinsed Biocide, left on to soak in
Pressure High Low Low
On the day Looks clean Looks lighter Looks the same
Lichen Stripped off with surface Not what bleach cleaners are sold for Named on roof treatment labels
What removes the dead growth The jet The rinse The weather, over months
Rinsed off Yes Yes No

What this means for your roof

Lichen is anchored in the tile, so it has to be treated where it is anchored. A pressure wash takes the tile's surface with it, and a soft wash lightens the stain and is rinsed away within minutes. A treatment left on the roof soaks into the growth where it sits, and the weather carries it off over the following months. That is how Bailiff works, applied from the roofline, at low pressure, to every face.

Also asked

Should you soft wash your roof?

Not if you want the growth ended. A soft wash lightens the staining and is rinsed off within minutes, so nothing stays on the roof to keep working, and the maker of one bleach cleaner says plainly that its product does not treat lichen. What ends growth where it is anchored is a treatment left on the roof to soak in. That is how UNGROW Bailiff goes on: at low pressure, from the roofline, every face covered.

Is soft washing a roof worth it?

For the look on the day, it does a job: a soft wash lightens the staining, which helps if the roof is going on the market next week. It leaves nothing on the roof to keep working, and the maker of one bleach cleaner says plainly that it does not treat lichen. For growth treated where it is anchored, not just lightened for the day, a treatment left on the roof is the better fit.

Do you rinse the roof after soft washing?

Yes. A soft wash is apply, wait, rinse. The asphalt roofing makers in the US say to leave a bleach solution on for 15 to 20 minutes and rinse it off gently, and BlueScope says to wash its steel down with plenty of fresh water after 3 to 5 minutes. A roof treatment is the opposite: 30 Seconds says of its roof product, do not rinse it off.

Does soft washing damage a roof?

It is far gentler on the surface than a pressure clean, because there is no jet. The risks are chemical. The maker of one bleach cleaner warns of corrosive, dulling and bleaching effects on untreated metal, powder coat, gloss paint and fabric, and says to rinse the plants and grass around it before and after use. Whatever runs off goes into the gutters and the garden.

Can I soft wash my roof myself?

Bleach based outdoor cleaners are sold at hardware stores, with directions for scrubbing and rinsing. On a roof that means someone up there with a brush and a hose, and Monier recommends against cleaning your own roof tiles because of the risk of falls and tile damage. If you do it, follow the label exactly, protect the plants below and keep the runoff out of any rainwater tank.

Is soft washing the same as a roof treatment?

No, though the two get mixed up. Both use low pressure. A soft wash is a short chemical clean that is rinsed away the same day. A roof treatment is a biocide, usually benzalkonium chloride, applied at the label rate and left on the roof to soak into the growth where it is anchored, with the dead growth weathering off over the following months. Ours, UNGROW Bailiff, works this way.

Can you soft wash a roof in the rain?

No. The directions on one bleach outdoor cleaner say to spray it onto the surface when it is dry, and for best results to choose an overcast day with minimal wind. A roof treatment asks for more, because it has to stay on: the Surrender label says not to apply it if rain is expected within 12 hours. UNGROW Bailiff goes on a dry roof with a dry window after it. When that falls in Perth is in the best time to treat a roof.

How often should you soft wash a roof?

Whenever the staining comes back, and the makers who recommend bleach say it may. The asphalt roofing makers in the US say the effectiveness of bleach cleaning "is only temporary, and the discoloration may recur", and the maker of one bleach cleaner says re-application may be required for persistent growth. A treatment is built the other way: it stays on and ends the growth where it sits, then UNGROW Sentry, our preventative, keeps the roof treated. How often that comes round is in how often does a roof need treating.

How long does it take to soft wash a roof?

Minutes, then it is rinsed off. The asphalt roofing makers in the US say to leave a bleach solution on for 15 to 20 minutes, BlueScope says 3 to 5 minutes on its Colorbond steel, and one bleach cleaner asks for at least 5 to 10 minutes, or 10 to 15 for heavy growth. A treatment runs on a longer clock: it goes on in one visit, stays on, and the dead growth weathers off over the following months. The timeline is in how long roof treatment takes to work.

Does bleach damage roof tiles?

Not the way a jet does: at low pressure, nothing is blasted off the surface. The risk is colour. The maker of one bleach cleaner lists terracotta and concrete tiles among its surfaces, warns that its sodium hypochlorite "may cause discolouration", and says to test an inconspicuous area first. The same maker says that cleaner does not treat lichen, whose threads work into the tile. Bleach on moss and lichen is in vinegar, bleach and home remedies.

On the record

  1. Marley (UK), Can I clean or jet wash my roof tiles?
  2. Monier, Roof cleaning and maintenance
  3. Asphalt Roofing Manufacturers Association, Algae discoloration of roofs
  4. BlueScope, TB-27: Identification of fungus in the field and recommendations for its removal (2022)
  5. 30 Seconds Australia, Outdoor Cleaner
  6. Lawrence Berkeley National Laboratory, Weathering of Roofing Materials: An Overview
  7. 30 Seconds Australia, Spray & Walk Away
  8. Australian National Botanic Gardens, What is a lichen?
  9. Australian National Botanic Gardens, Lichen form and structure
  10. Scanning, Evaluation of the effect of lichens on ceramic roofing tiles by scanning electron microscopy and energy-dispersive spectroscopy analyses (2005)
  11. 30 Seconds Australia, Roof Treatment
  12. Yates / Hortag, Surrender Mosskiller label (10 L)
  13. 30 Seconds Ltd, 30 Seconds Roof Treatment Concentrate: safety data sheet (2019)
  14. Yates, Yates Surrender Moss Killer

Get a price

Start with the address.

We price it off the address. No site visit, no two hour window, nobody walking through your house.

  1. 01You send the address.
  2. 02We look at the roof and send you a fixed price.
  3. 03To go ahead, tap Accept on the quote. We call you to pick a day.
  4. 04We treat it and photograph it the same day.
  5. 05We check it against that photo at twelve months.
  • Fixed price
  • Fully insured
  • 12 month guarantee

NOTICE TO VACATE

To

Moss, lichen, algae, mould

Leave by

Over the next 3 to 18 months

Evicted from the roofline.

Roof treatment · Western Australia