The ruling
Gently: treat the growth where it sits. We treat Colorbond and Zincalume roofs with UNGROW Bailiff from the roofline, and it works the same way as on tiles: it ends the growth in place, and the weather carries it off. For a hand wash, BlueScope sets fresh water, mild detergent and a soft brush, never abrasives or solvents.
Yes, we treat Colorbond, and it works the same way
We treat Colorbond and Zincalume roofs with UNGROW Bailiff, our treatment. It works on steel the way it works on tiles: it ends the growth where it sits, and the weather carries it off over the following months. It goes on from the roofline, from ladders, through a low pressure soft wash pump and non-directional nozzles, so nothing is scrubbed, nothing is forced under the laps and nobody walks on the sheets.
Staying treated runs on a slightly shorter rhythm on steel. Smooth painted steel holds less of the treatment than a porous tile does, so a metal roof can be due its top up with UNGROW Sentry, our preventative, sooner than a tiled roof, and we keep it on that rhythm. How often a roof needs treating sets out the rest.
In plain terms It is the same weed spray on a brick path as on a smooth concrete one. It works the same on both; the brick soaks more of it in, so the smooth path gets its next spray a little sooner.
What BlueScope says a roof needs
BlueScope makes Colorbond and Zincalume steel, and it publishes its own maintenance method. Its starting point is the rain. Regular washing with clean fresh water prolongs the life of Colorbond steel, and where the finish is naturally washed by rainwater, as on a roof, it does not usually need that extra washing. The parts the rain misses do: wall cladding under the eaves, the top of garage doors and the underside of eave gutters should be hosed at least every six months, and more often near the coast.1 BlueScope calls those unwashed areas, and says dust and dirt there absorb condensation and can start corrosion.2
Lysaght, BlueScope's roofing brand, puts the stakes in one line. Of the factors that most affect how long a roof lasts, its design, its environment and its maintenance, "Maintenance is probably the biggest factor." That maintenance includes regular inspection "for problems before they become major corrosion sites" and clearing leaves and debris from the gutters and downpipes.3 Its maintenance manual asks for maintenance at least every four months, ideally at the end of autumn and the end of spring, with the sheets inspected for debris, dust, pollutants and "organic growth".4
In plain terms The rain does the rinsing. The owner's job is to make sure nothing sits on the roof that the rain cannot shift, because whatever sits there holds the damp.
The method, step by step
Lysaght's procedure for the roof sheets starts dry. Sweep twigs, dust, leaves and fungal matter into a pile with a stiff, soft bristled brush, never a shovel or a hard tool, and lower it to the ground. Then wash the whole roof and gutter down with a hose. If significant fungal growth is found, it is identified and removed by BlueScope's fungus bulletin, and stubborn stains are cleaned by its maintenance bulletin.4
That maintenance bulletin sets out the wash. Use a mild solution of pure soap or non abrasive dishwashing detergent in warm water, applied with a sponge, a soft cloth or a soft bristle nylon brush, gently, with no abrasive scourers or steel wool. Rinse it off with fresh water straight away. BlueScope adds four cautions: do not use hard, mineral rich ground water such as bore water; keep soap and detergent runoff out of rainwater tanks; follow local water restrictions; and test the method first on a small hidden section, to make sure it does not dull or discolour the sheet.2 It also warns that washing must not flood the eaves, which could damage the ceilings below.5 Tanks get their own file: rainwater tanks and roof treatment.
In plain terms Wash it like a car, not like a barbecue plate. Soft brush, mild soap, plenty of clean water, and stop as soon as it is clean.
Fungus and lichen: the bleach wash
Black fungus and lichen are a different job, and BlueScope has a different method for them. It recommends washing a Colorbond roof down with a 2 percent sodium hypochlorite solution, made up from commercially available bleach, applied with a soft bristle broom, left for 3 to 5 minutes and washed off "with copious amounts of fresh potable water". A little non ionic detergent, such as dishwashing liquid, may be added to help it wet the surface.6
It sets firm limits around that. Higher than recommended concentrations or extended contact times "may be detrimental to the long term performance" of Colorbond steel, and the solution must not be washed into water tanks.6 The full method, and why lichen does not simply wipe away, is in how to get rid of lichen on a Colorbond roof.
In plain terms A short, measured soak and a thorough rinse, followed like a recipe. Stronger or longer is not better here; the steel maker says it may cost the paint.
What never goes on it
BlueScope's list of what to keep off its steel is short and absolute. "Never use abrasive or solvent-based cleaners (e.g. turpentine, petrol, kerosene, or paint thinners)" on its prepainted steel, and those cleaners, sugar soap as well, are not to be used on bare Zincalume steel.2 Acidic products must not be used on Zincalume or galvanised steel, "as excessive staining and corrosion will occur".7 Abrasive sponges and scourers "are not suitable for use and will damage the surface".8 Fielders, another BlueScope brand, says harsh cleaners and scourers damage the surface of Colorbond steel and "not only void your warranty but leave blemishes and discoloration", and that acetone, methyl ethyl ketone, toluene and thinners should never be applied.9
For a mark that soap will not shift, BlueScope's spot cleaning bulletin names four products, Ajax Spray n' Wipe, Windex Original, Sabco Heavy Duty Wet Workshop Towels and Selleys Sugar Soap, to be tested on a hidden area first, checked after 24 hours, and used on a cool surface out of direct sun.8 The warranty is the backstop, and it expects the sheets kept clear. BlueScope's sample warranty for Colorbond roof sheets does not cover corrosion or paint flaking caused by a "failure to remove debris and/or allow free drainage of water/moisture" from the sheets10, and Lysaght counts fungal matter as debris to be removed.4
In plain terms If it would strip nail polish or scour a frying pan, it stays off the roof.
Can you make it look new again?
Clearing the growth brings back the roof's own colour from under it. BlueScope's spot test tells growth from dirt: a drop of fresh bleach on a dark patch, left a few minutes, comes up clean if the dark is fungus, while ordinary dirt does not bleach.6
The gloss runs on its own clock. Colorbond weathers, and BlueScope expects it: after one to two years in service it typically has a uniformly weathered surface with a slight loss of gloss.11 BlueScope's warranty treats a natural reduction in gloss and a natural colour change of the paint as normal weathering.10 Scrubbing for shine backfires. Lysaght says to be gentle when washing Colorbond "to prevent shiny spots"3, so a hard scrub leaves the roof patchy, not new.
In plain terms You can wash a ten year old car until it gleams, but it is still ten years old. A clean roof is the roof's real colour, not the showroom one.
Getting up there
Every method above puts someone on the roof or at its edge. BlueScope says foot traffic can dent, scuff or scratch roof sheeting, that a dent which ponds water can raise the potential for corrosion, and that working on a wet roof is not recommended because roofs are slippery when wet.5 Lysaght says patio and verandah roofs are not designed for foot traffic and should not be walked on at all.4 Why nobody needs to walk on your roof covers the rest.
In plain terms A wet steel roof is a sheet of glass at an angle, with a gutter at the bottom and a drop beyond it.
What this means for your roof
On a Colorbond or Zincalume roof, the steel maker's rules are clear: keep debris and growth off the sheets, keep the gutters running, and keep abrasives, solvents and acids off the steel. BlueScope warns that debris left sitting on steel can hold moisture for long periods and speed corrosion5, so growth is worth dealing with early. We treat it with UNGROW Bailiff from the roofline, at low pressure, with nobody walking on your roof, and UNGROW Sentry keeps it treated after that. Run the Roof Report to see which faces of your roof stay wet longest, and put your address in below for a fixed price.
Also asked
How often should a Colorbond roof be cleaned?
BlueScope says roofs washed by rain do not usually need extra washing, while the parts the rain misses, such as wall cladding under the eaves and the underside of gutters, need hosing at least every six months, and every three months near the coast. Lysaght's maintenance manual sets maintenance of the roof and gutters, inspection included, at least every four months, ideally at the end of autumn and the end of spring.
How do you clean algae off a Colorbond roof?
Gently, with the steel maker's own wash. BlueScope's method for fungus and lichen on Colorbond is a 2 percent sodium hypochlorite solution made from household bleach, brushed on with a soft bristle broom, left 3 to 5 minutes and rinsed off with plenty of fresh water, away from the tanks. Its bulletin notes the bleach affects algae too. No scourers, solvents or acids. We skip the broom and treat it from the roofline with UNGROW Bailiff. More in how to get rid of algae on a roof.
How do you get black mould off a Colorbond roof?
BlueScope calls the black growth on its steel fungus, and sees it heaviest along the ridge capping, where moisture and nutrients leave the roof cavity. Test a patch with a drop of fresh bleach first; fungus comes up clean in a few minutes, dirt does not. BlueScope's wash is a 2 percent sodium hypochlorite solution on a soft bristle broom, left 3 to 5 minutes, then rinsed off with plenty of fresh water, away from the tanks. Treating it where it sits is in black mould and streaks.
Can you use methylated spirits to clean Colorbond?
It is not on BlueScope's list. BlueScope's cleaners are fresh water, mild soap or detergent and, for stubborn marks, four named household products. It says never to use abrasive or solvent based cleaners on its prepainted steel, naming turpentine, petrol, kerosene and paint thinners. Methylated spirits is a solvent. Ask BlueScope's Steel Direct line before it goes anywhere near the roof, and test any cleaner on a hidden spot first.
Does vinegar damage a Colorbond roof?
Vinegar is acetic acid, and BlueScope says acidic products must not be used on Zincalume or galvanised steel, because excessive staining and corrosion will occur. It is not one of the cleaners BlueScope lists for Colorbond, and BlueScope tells installers to avoid acetic acid based sealants, warning that sealants smelling of vinegar give off by-products as they cure that can be corrosive to the coatings on steel. Keep it off a metal roof.
Does Bunnings sell a Colorbond roof cleaner?
Bunnings sells roof treatments, and the maker of one, 30 Seconds, lists steel roofs among the surfaces for its roof product. Its active is benzalkonium chloride, a quaternary ammonium compound, the same active as our own treatment, UNGROW Bailiff. Read the label and follow it to the letter, and keep to BlueScope's rules for the sheet, with no abrasives, no solvents and no acids. The products on the shelf are compared in our file on the hardware store roof products.
What do professionals use to clean metal roofs?
We treat Colorbond and Zincalume roofs with UNGROW Bailiff, a benzalkonium chloride treatment, and it works on steel the same way it works on tiles. It goes on from the roofline with a low pressure soft wash pump through non-directional nozzles, so nothing is forced under the laps and nobody walks the sheets. For washing by hand, BlueScope's technical bulletins are the book, and the warranty asks for the roof to be maintained in strict accordance with them. That means fresh water, a mild detergent and soft brushes, with no abrasives and no solvents.
On the record
- BlueScope (COLORBOND steel), Easy to Maintain
- BlueScope, TB-4 Maintenance of exterior BlueScope coated steel products (2026)
- Lysaght (BlueScope), Roofing & Walling Installation Manual
- Lysaght (BlueScope), Roofing & Rainwater Maintenance Manual (2024)
- BlueScope, TB-36 Guide to good practice: steel roofing and photovoltaic/solar panels (2025)
- BlueScope, TB-27: Identification of fungus in the field and recommendations for its removal (2022)
- BlueScope, TB-5 Swarf staining (2022)
- BlueScope, TB-4a Spot cleaning of exterior COLORBOND steel products (2023)
- Fielders (BlueScope), Removing graffiti from Fielders cladding and Dominator fencing (2024)
- BlueScope, COLORBOND steel when used in the manufacture of roof sheets in Australian applications (sample warranty) (2026)
- BlueScope, TB-2 Overpainting and restoration of exterior BlueScope coated steel products (2022)