The ruling
Yes, and we treat it. BlueScope, which makes Colorbond, says fungus grows on its steel in many tropical and temperate parts of Australia, and lichen where conditions suit it; moss attaches to metal roofs too. We treat Colorbond with UNGROW Bailiff from the roofline: it ends the growth where it sits, and the weather carries it off.
Metal is not immune
Steel does not soak up water the way a porous tile does, and plenty of people take that to mean nothing grows on it. The steel maker says otherwise. BlueScope, which makes Colorbond and Zincalume steel, says fungal growth has been observed on a variety of building materials, Colorbond steel among them, in many tropical and temperate areas of Australia, and that where the local environment is particularly favourable, lichen can spread across the entire roof. Its bulletin shows a Colorbond roof with spotty lichen and fungus spread across it. BlueScope puts it plainly: Colorbond steel "is no more prone to fungal growth and discolouration than any other building material".1
Researchers have watched it happen. Painted steel roofing and walling panels left out for 52 weeks at Burrawang, in New South Wales, were colonised by fungi, bacteria and cyanobacteria, with fungi the dominant organisms, and among the fungi, Cladosporium, Epicoccum nigrum and Aureobasidium appeared to be the first to arrive. By the end of the year the panels were "relatively heavily fouled".2 Moss follows: Oregon State University's extension service says moss attaches to metal roofs as well as asphalt ones.3
In plain terms A steel roof is not a non stick pan. Anything that lands on it and stays damp for long enough gets a start, and on painted steel most of what takes hold is fungi, the kind that show as dark staining.
Why it grows where it does
Spores land on every roof, all the time. BlueScope's bulletin cites an estimate of as many as 10,000 fungal spores in a cubic metre of air, settling on surfaces of every kind. Most are washed off by rain. Where moisture, heat, humidity and nutrients are present in the right balance, some species hold on and multiply into colonies that visibly darken the surface.1
On a steel roof, BlueScope names the places that balance comes together. Heavy growth is often seen along the ridge capping, which it puts down to moisture and nutrients leaving the roof cavity where the capping meets the sheets. The areas around bathroom vents count the same way. Growth also turns up as scattered patches of lichen, or as an even coat across the whole roof.1 The rest of the pattern is the same as on any roof: the south facing sheets and anything under a tree stay wet longest after rain and dew, and time of wetness decides where growth settles. That is laid out in why roofs grow moss and lichen.
In plain terms Think of the bathroom ceiling above the shower. The corner with the steam and the least air is where the black starts, and a roof has its own corners like that, at the ridge, the vents and the shade.
What growth does to a steel roof
The researchers who studied the Burrawang panels open with it: microbial colonisation of prepainted steel used for roofing "impacts their aesthetics, durability, and functionality". They also note that colonisation and discolouration "inhibit solar reflection and thus retard the beneficial properties of the materials".2 That matters on a modern Colorbond roof, because nearly all of its core colours are designed for solar reflectance, to reflect more of the sun's heat on hot days and help keep the building cooler.4 On lighter coloured roofs, BlueScope says very heavy growth can change the overall colour and appearance of the roof.1
Lichen works on the paint itself. On painted steel test plates left out in the weather for 15 years in La Plata, Argentina, six species of lichen settled on the plates. Under the electron microscope, the paint had cracked around the crust lichen Caloplaca cinnabarina, and small pieces of paint were trapped inside the lichen's body. The researchers concluded that this lichen can deteriorate a painted surface and take pieces of it into itself, and they point to the lichen swelling and shrinking and to the chemical compounds it makes.5 On roof tiles, lichen goes further, as does lichen damage roof tiles sets out.
In plain terms The dark film is more than a stain. It cuts into the heat a roof was built to throw back, and the lichen in it works at the paint the way a tree root works at a footpath.
Water held against the sheet
Moss is a sponge. Bryophytes, the group mosses belong to, hold "from just a few times to many times their own weight in water, depending on species".6 On a roof, moss also traps soil and debris and holds moisture.3
BlueScope's own bulletins explain why that matters on steel. Writing about materials that absorb moisture and hold it against roof sheets for long periods, it says "Extended time of wetness can be a major influence of corrosion mechanisms."7 Writing about the roof under solar panels, it warns that dirt, salt and leaves that build up there and hold moisture may bring on accelerated corrosion, and that ponded water gives Colorbond and Zincalume steel an extended period of wetness that may increase the potential for corrosion or water getting in.8 Its sample warranty for Colorbond roof sheets does not cover corrosion due to "failure to remove debris and/or allow free drainage of water/moisture", or due to contact with "moisture retaining substances".9
The gutters are part of the same job. Lysaght, BlueScope's roofing brand, tells owners to inspect gutters for "organic growth" and to clear out twigs, dust, leaves and fungal matter so the water runs free.10 Moss washed off the sheets ends up there, as moss in gutters and valleys explains.
In plain terms Leave a wet towel folded on a steel bench and the mark is still there when you lift it. A moss cushion is that towel, left out all winter.
Metal or tiles: which grows more?
Neither is spared. BlueScope lists roof tiles, painted wood, PVC pipes, powder coated handrails and skylights as prone to the same growth, and says that where it shows on a Colorbond roof, neighbouring structures and fences typically show it too.1 A house with a tiled main roof and a steel patio, or a Colorbond roof beside a tiled neighbour, will usually carry the same crew on both.
What differs is the surface. A roof tile is porous, and on clay tiles lichen threads have been found penetrating the tile and filling its cracks.11 Steel is not porous, so the growth works on the paint, and on how the sheet sheds water: darkening the finish, cutting the heat it reflects, holding damp against the sheet and the laps, and filling the gutters. Terracotta or concrete tiles covers the tile side of the comparison.
The treatment is the same on both. We treat Colorbond and metal roofs with UNGROW Bailiff, and it ends the growth where it sits on steel just as it does on tiles, and the weather carries it off. Staying treated runs on a slightly shorter rhythm on steel: smooth painted steel holds less of the treatment than a porous tile, so a metal roof can be due its top up with UNGROW Sentry, our preventative, sooner, and we keep it on that rhythm.
In plain terms The same weeds grow in a lawn and in the cracks of a driveway. They do different damage in each, and neither is a reason to leave them.
What this means for your roof
A steel roof grows the same crew as a tiled one, and the steel maker counts anything that sits on the sheet and holds water as a corrosion risk, so deal with it early and gently: growth dealt with early has less time to work on the paint and stays out of the gutters. We treat Colorbond and metal roofs with UNGROW Bailiff, the same way as tiles: it ends the growth where it sits, and the weather carries it off. UNGROW Sentry, our preventative, keeps the roof treated after that. BlueScope's own hand wash is in how to clean a Colorbond roof. Run the Roof Report to see which faces of your roof stay wet longest, and put your address in below for a fixed price, with the work done from ladders at the roofline at low pressure, nobody walking the sheets and nothing scraping the paint.
Also asked
Do you treat Colorbond and metal roofs?
Yes. We treat Colorbond, Zincalume and other metal roofs with UNGROW Bailiff, from ladders at the roofline, and it works the same way it does on tiles. It ends the growth where it sits, and the weather carries it off over the following months, with nothing scraped or blasted off the paint and nobody walking the sheets. Smooth painted steel holds less of the treatment than a porous tile, so a metal roof can be due its top up with UNGROW Sentry, our preventative, sooner. Staying treated is what keeps it clear.
Are metal roofs moss resistant?
No roofing is. BlueScope says its Colorbond steel is no more prone to fungal growth and discolouration than any other building material, and lists roof tiles, painted wood, PVC pipes and skylights as prone too. Oregon State University's extension service says moss attaches to metal roofs as well as asphalt ones. Steel does not soak up water the way a tile does, but wherever it stays damp, growth settles.
What causes lichen on a Colorbond roof?
Spores that land on every roof, and a spot that stays damp long enough for them to settle. BlueScope says growth takes hold where moisture, heat, humidity and nutrients are in the right balance, and that where the local environment is particularly favourable, lichen can spread across the whole roof. Shade from trees and the south facing sheets are the usual places it starts on a Perth roof.
Does moss damage a metal roof?
Moss can hold many times its own weight in water, and it traps soil and debris. BlueScope's bulletins say materials that hold moisture against roof sheets matter, because extended time of wetness can be a major influence on corrosion, and its Colorbond roof warranty does not cover corrosion due to a failure to remove debris or contact with moisture retaining substances. Moss in the gutters adds a blocked gutter to that.
What are the downsides of a Colorbond roof?
Where growth is concerned, three. Fungus, lichen and moss settle on steel as on any roof, and the discolouration cuts the heat Colorbond colours are designed to reflect. On painted steel test plates left out for 15 years, the paint was found cracked around a crust lichen. And moss or debris left on the sheet holds water against it, which BlueScope counts as a corrosion risk, and its warranty does not cover corrosion from debris left in place. Rust, fading and painting are in does a Colorbond roof rust.
Is a Colorbond roof better than tiles for moss and lichen?
Neither is spared. BlueScope says neighbouring structures and fences typically show similar growth to a Colorbond roof beside them. What differs is what the growth does. On a porous tile, lichen threads work into the surface itself. On steel, growth sits on the paint, darkens it, holds water against the sheet and, in the case of lichen, can crack weathered paint. We treat both the same way, with UNGROW Bailiff from the roofline.
On the record
- BlueScope, TB-27: Identification of fungus in the field and recommendations for its removal (2022)
- MicrobiologyOpen, Investigation of the microbial communities colonizing prepainted steel used for roofing and walling (2017)
- Oregon State University Extension Service, How to control roof moss and prevent long-term damage
- BlueScope (Steel Select), Durable Performance of COLORBOND steel
- Journal of Basic and Applied Research International, Lichens growing on painted metal plates (2015)
- Australian National Botanic Gardens, Bryophyte ecology
- BlueScope, CTB-17 Following trades (2022)
- BlueScope, TB-36 Guide to good practice: steel roofing and photovoltaic/solar panels (2025)
- BlueScope, COLORBOND steel when used in the manufacture of roof sheets in Australian applications (sample warranty) (2026)
- Lysaght (BlueScope), Roofing & Rainwater Maintenance Manual (2024)
- Scanning, Evaluation of the effect of lichens on ceramic roofing tiles by scanning electron microscopy and energy-dispersive spectroscopy analyses (2005)