The ruling
They are different jobs. A restoration is building work: repairs, rebedding, a pressure clean and a respray that Monier, the tile maker, calls aesthetic only. A treatment ends the growth where it sits, at low pressure, before lichen threads and acid mark more of the tile. A sound roof with growth needs treating, not restoring.
What a roof restoration involves
A roof restoration is building work. The exact steps vary by contractor, but the coating makers spell out the system their products are built for, and it is the benchmark to hold any quote against. One Australian system, Acryloc's Roofcote, runs like this: disconnect rainwater tanks from the gutters; apply a roof clean product to remove moss and lichen; pressure clean until every surface is clean and sound; apply a mould inhibitor, which the maker says "will inhibit growth of moss & lichen"; repoint the ridges if required; prime, which the maker calls essential; then apply at least two coats of membrane.1 Broken tiles are replaced and cracked bedding under the ridge capping is rebedded or repointed, which Monier lists as the fixes for two of the usual causes of a leak.2
Done properly that is a big job. Dulux, which makes another of these systems, says a restoration can take 3 to 5 days, depending on the size of the roof and the weather: scaffolding and repairs, a pressure wash and growth treatment, a primer or sealer, then two coats of membrane.3 Acryloc backs its full system for ten years against cracking, peeling, flaking or blistering caused by a defect in manufacture, provided a skilled applicator has prepared the roof and applied it correctly.1 That cover is for the paint. Moss and lichen are not in it.
In plain terms A restoration is retiling the bathroom; a treatment deals with the mould in the grout. You do not retile a bathroom for mould, and new tiles in a damp corner grow it again.
When a roof genuinely needs one, or needs a roofer
Monier's FAQ lists the usual causes of a leak on a tiled roof, and two of them are exactly what a restoration fixes: cracked or broken tiles, which "should be replaced", and cracked or broken mortar bedding to the ridge or hip capping, which "should be re-bedded or re-pointed".2 If your roof leaks, has tiles you can see are cracked or slipped, or has mortar falling out of the ridges, it needs a roofer. A treatment does not mend a cracked tile or a failed ridge, and we do not pretend it does. Whoever does the repair, the law backs the work: under the Australian Consumer Law, services supplied to a consumer come with guarantees that they will be rendered with due care and skill and, where you made the purpose known, be reasonably fit for it. A contract term that tries to exclude them is void.4
Two more causes on the same list are blockages, not breakages: blocked gutters and valley gutters, and blocked drainage channels under the side laps of the tiles.2 Valleys collect leaves, moss and sediment washed down from the tiles above, and when a valley blocks, the water backs up and can overflow into the roof space.5 A coat of paint clears none of that. It is covered in moss in gutters and valleys.
The colour is a different matter. Monier says the colour of a concrete tile "will fade and weather over time", and that the coating is "purely decorative" and plays no protective role.2 It says the same of the whole respray: "respraying your roof is aesthetic only and will not repair your roof".2 A faded concrete roof is a question of looks, and recoating it is a choice, not a repair. Terracotta is different again: Monier does not recommend painting it, and says unglazed terracotta that is painted will need recoating from then on.2
In plain terms If water is getting in, call a roofer. If the roof just looks tired, that is a decision about appearance, and you have time to make it.
What a treatment is
A treatment deals with the growth. Ours is UNGROW Bailiff, a biocide built on benzalkonium chloride. It is mixed on the day to its label rate, measured to the roof's area, applied to every face at low pressure and left there. It soaks into the moss, lichen, algae and mould where they sit and ends them in place. Then the weather does the removal over the following months. Yates says it plainly about its own moss product, Surrender: it "kills lichens on roofs but does not remove them".6 There is no repair in it and no coating over the tile. The chemistry is in how roof treatment works.
Ending the growth is not cosmetic. On clay roof tiles six to ten years old, electron microscopy found lichen threads penetrating the tile and filling its fissures and cracks, and the researchers identified the lichen's attack on the ceramic as oxalic acid at work.7 The Australian Roofing Tile Association lists moss and lichen among the common causes of fretting in older clay tiles, the tile material wearing away into fine dust, because they hold moisture against the tile.8 The detail is in does lichen damage roof tiles. A coating goes over the top of the surface. A treatment ends what is working on it.
Growth recurs on any roof that stays damp, so staying treated is what resolves it. The first treatment is the hard one. We photograph the roof on the day from a fixed position, and if it looks the same as that photo at twelve months, we treat it again with Bailiff, free. Keeping it treated after that is the easy part, and that is the job of UNGROW Sentry, our preventative: a top up from the roofline that ends young, thin growth where it sits, before it anchors. How often is in how often does a roof need treating.
In plain terms A treatment is spraying the weeds in the path and letting them die back. A restoration is relaying the path.
Why they are different jobs
A restoration changes the roof's surface: new bedding, new pointing, a primer and a membrane. It does not change the shade, aspect and rain that bring growth to that roof. In a field trial of cement based materials placed in three different environments, the researchers concluded that the environmental conditions had a greater impact on early colonisation than the properties of the material itself.9 A coat of paint moves none of those conditions, and the coating maker itself puts a mould inhibitor under its system to hold back moss and lichen.1 Why some faces grow more than others is in why roofs grow moss and lichen.
It also explains the order. Growth has to be dealt with before anything is coated over it, and the restoration system itself starts with a moss and lichen clean.1 And a restoration's preparation calls for a pressure clean, the very thing Monier strongly advises against for roof cleaning, because of "a significant risk of tile damage".1, 10 On a roof about to be repaired, primed and coated, it is part of the job. On a roof that is only being cleaned, it is the risk without the reason. What that does to an uncoated tile is in does pressure cleaning damage roof tiles.
In plain terms Painting a damp wall does not dry the room. The paint looks good, and the reason it got damp is still there.
Which one your roof needs
- It leaks, tiles are cracked or slipped, or the ridge mortar is breaking up. A roofer, for repairs or a restoration. Repairs come first.
- The tiles are sound but faded. A coating is a choice about looks. Nothing is failing.
- The tiles are sound and there is moss, lichen, algae or mould. A treatment, before the growth works further into the surface.
- It is a sound Colorbond or metal roof with growth on it. A treatment, exactly as on tiles: we treat metal roofs with UNGROW Bailiff from the roofline. See can moss and lichen grow on a metal roof.
- Both. Repairs first, and the growth dealt with before any coating goes on.
- It is grey corrugated sheeting from before 1990. An asbestos professional, first. We generally do not treat asbestos cement roofs, so have it assessed before anything else. HealthyWA says a home built before 1990 likely contains asbestos in some building products, and that many asbestos roofs are brittle and deteriorating, so it is better to replace them than to try to clean or paint them.11 Read can you pressure clean an asbestos roof in WA.
In plain terms Fix what is broken, decide about the colour, and treat what is growing. Three questions, and they are answered by different people.
What this means for your roof
If the roof is sound, tiled or Colorbond, and it is growing moss and lichen, it does not need restoring. It needs the growth ended where it sits, before lichen works further into the surface and more moss washes down into the valleys. We treat it with Bailiff from the roofline, through a low pressure soft wash pump and non-directional nozzles, so nothing is blasted off the surface or forced under the laps, and the weather carries the dead growth away.
Also asked
Is roof restoration worth it?
It is worth it when the roof needs the work: broken tiles, cracked bedding along the ridges, leaks, or a coating that is failing. If all the roof has is growth on sound tiles, a restoration is a lot of work to buy for a treatment job. Monier says respraying a roof is aesthetic only and will not repair it, and that the colour coat on a concrete tile is purely decorative.
How long does a roof restoration take?
Dulux, which makes one of the roof coating systems, says a restoration can take 3 to 5 days, depending on the size of the roof and the weather. On an average medium sized home that covers scaffolding and repairs, a pressure wash and growth treatment, a primer or sealer, then two coats of membrane. A sound roof with growth needs none of it: a treatment is one visit, from ladders at the roofline, and the weather clears the growth over the following months.
Does a roof restoration include the gutters?
Only if the quote says so. The coating makers write their systems for the roof itself, and their gutter step is about the water: Acryloc recommends disconnecting rainwater tanks from the guttering before work starts, and keeping it disconnected until every coat is on and the residues are washed out. If you want the gutters cleaned, put it in the quote. Our treatment does not include them either, and dead growth washes into them, so clear them after the first winter. More in moss in gutters and valleys.
Does moss on the roof mean it needs replacing?
No. It means it needs treating. Growth works on the surface of the tile: on clay roof tiles, electron microscopy found lichen threads filling the tile's fissures and cracks, and the Australian Roofing Tile Association lists moss and lichen among the common causes of fretting in older clay tiles. Replacement and restoration are about the structure: broken tiles, failed ridges, leaks. On sound tiles, the growth is a treatment job, and the sooner the better.
Will a restoration stop moss coming back?
No. Growth recurs on any roof that stays damp, coated or not. The coating maker whose system we describe does not leave that to the paint: it adds a separate mould inhibitor before the primer, which it says "will inhibit growth of moss & lichen". Shade, aspect and rain decide where growth settles, and a coat of paint moves none of them. Staying treated is what resolves it: a top up of UNGROW Sentry, our preventative, from the roofline.
Can broken roof tiles be repaired?
Monier's advice is that cracked or broken roof tiles should be replaced individually. That is a roofer's job, and it is worth doing before any treatment or coating goes on, because a cracked tile is one of the usual causes of a leak. What cracks them, and how a roofer replaces one, is in cracked roof tiles.
Should roof repairs come with a guarantee?
Yes, and by law they already do. Under the Australian Consumer Law, services supplied to a consumer are guaranteed to be rendered with due care and skill and, where you made the purpose known, to be reasonably fit for it, and no contract can exclude that. A roofer's written promise sits on top: ask what it covers. Ours covers a treatment, not a repair: we photograph the roof on the day, and if it looks the same as that photo at twelve months, we treat it again with Bailiff, free.
Do restorers treat the growth first?
The good ones do. The restoration system from one Australian coating maker starts with a roof clean product to remove moss and lichen before the pressure clean, and a mould inhibitor before the primer. The growth has to be dealt with before anything is painted over it.
On the record
- Acryloc Building Products (Haymes), Acryloc Roofcote CRC Membrane: Data Sheet TECH26150 (2017)
- Monier, FAQs
- Dulux Acratex, via Vivify Roofing, Roof Restoration Process (2023)
- Federal Register of Legislation, Australian Government, Competition and Consumer Act 2010, Volume 4: Schedule 2, The Australian Consumer Law (Compilation No. 167) (2026)
- BMI Malaysia (Monier), Roof Leak Causes and How Tile Roofs Prevent Them
- Yates, Yates Surrender Moss Killer
- Scanning, Evaluation of the effect of lichens on ceramic roofing tiles by scanning electron microscopy and energy-dispersive spectroscopy analyses (2005)
- Australian Roofing Tile Association, Fretting in Clay Roof Tiles: A Consumer's Guide (2024)
- The Science of the total environment, Evaluation of natural colonisation of cementitious materials: effect of bioreceptivity and environmental conditions (2015)
- Monier, Roof cleaning and maintenance
- HealthyWA (WA Department of Health), Asbestos in and around the home