Case · What it costs

How much does roof cleaning cost in Perth?

The ruling

From $539 including GST, for a first treatment with UNGROW Bailiff, our roof treatment. The price is built from your roof's area, measured from aerial imagery, with set additions for a second storey, difficult access and outer suburbs. It is a fixed price, with no site visit, and the roof is checked against a photo at twelve months.

Roof treatment cost in Perth: from $539 including GST

A first treatment with UNGROW Bailiff, our roof treatment, is from $539 including GST. That is our job minimum, the price the smallest roofs are quoted at, and we clean roofs right across Perth. A bigger roof costs more, worked out the same way, whether the growth is moss, lichen, algae or mould.

What that buys is the growth ended, not a roof scrubbed bare on the day. Bailiff is a biocide built on benzalkonium chloride. It soaks into the growth where it is anchored and ends it there, and growth starts coming away over 3 to 18 months as the weather carries it off. How it works is in how roof treatment works, and When will it clear? works through the months for your roof and the month you treat it.

Our price always includes GST. Consumer Protection WA says "It is best practice for a tradesperson to show a total cost including GST".1

In plain terms It is like spraying the weeds in a paved path. You pay for the spray going on, not for anyone pulling them out, and the weather clears them away afterwards. On a roof, that takes months rather than weeks.

How a roof cleaning price is worked out

The price is built from your roof's area, measured from aerial imagery of the address, so nobody needs to come out and you do not need to be home. Area decides the work: Bailiff is mixed on the day to the label rate for the measured area, and every face gets it. A tiled roof is also bigger than it looks. Wet & Forget, which makes a retail roof product, says the undulations in the tile make an average three bedroom tile roof of about 150 square metres "actually larger than 150sq metres" to treat.2

Two faces of a terracotta roof either side of a valley, the right face carrying more lichen than the left, with a ladder at the roofline
Exhibit A Two faces of one Applecross roof, either side of a valley. The price is built from the area of the whole roof, and every face is treated, the lighter one too.

On top of the area go three set additions: a second storey, difficult access and outer suburbs.

The result is a quote, not an estimate. Consumer Protection WA describes a quote as "the total amount a tradesperson agrees to charge for a job or service", and an estimate as "a best guess on the cost of the work".1 Ours is a fixed price, set before the day.

That is why an "average cost of roof cleaning" tells you little: a figure without your roof's measured area describes someone else's roof. A rate per square metre, or per square foot, is only half a price until it meets that measured area. The calculator that means something is your own address, in the form at the foot of this page. The Roof Report shows it from above, face by face.

In plain terms Pricing a roof is like pricing carpet. Nobody can tell you what your room costs until it is measured, and a floor plan gives the measure without anyone walking through the house.

What the price includes, and what it does not

The price includes:

  • Every face treated with Bailiff from ladders at the roofline, through a low pressure soft wash pump and non-directional nozzles, with nobody walking across the roof.
  • Tanks and panels. Downpipes that feed a rainwater tank come off or are diverted before we start. We spray around solar panels, not on them.
  • The guarantee. We photograph the roof on the day from a fixed position and check it against that photo at twelve months. If it looks the same, we treat it again, free.
  • Insurance. We are fully insured. If we break something, we fix it at our cost.

It does not include:

  • Gutters. We treat the roof; we do not clean gutters. Dead growth washes into them over the months after, so they are worth clearing after the first winter. Monier, which makes roof tiles, says blocked gutters, downpipes and valleys "are common sources of leaks", to be cleaned "annually at a minimum".3 More in moss in gutters and valleys.
  • Repairs. Cracked or slipped tiles and broken ridge bedding go to a roofer. Monier says "Replacing tiles or performing roof repairs should always be handled by a qualified roofing professional."3
  • Later top ups. Keeping the roof treated afterwards is the job of UNGROW Sentry, our preventative, priced off the address the same way when it is due.
Rows of concrete tiles on a Wembley roof seen from a ladder at the roofline, speckled white with treatment just applied, a gloved hand in the foreground
Exhibit B A Wembley roof from the ladder at the roofline, just after treatment. The white is the treatment, still wet. The growth under it looks exactly as it did.

In plain terms It is a car service with a guarantee on the work. The service and the comeback are in the price; the panel beating is another shop.

Roof moss treatment cost, and why the first one is the big one

Moss or lichen, the price is built the same way, from the area. What differs is what the treatment meets. A first treatment meets years of build up: moss packed into the valleys and laps, and lichen crusts that have been spreading for years. Waiting adds to it. On clay roof tiles six to ten years old, electron microscopy found lichen threads penetrating the tile and filling its fissures and cracks, and the researchers traced the lichen's effect on the ceramic to its oxalic acid.4 Every year it stays, it marks more of the surface.

After that, staying treated is routine. A top up with Sentry goes onto a roof that is already clear, where any new growth is young and thin. That is roof maintenance on a tiled roof: the growth kept treated, the gutters and valleys cleared every year, and, in Monier's words, "engaging a qualified roofing professional to carry out any inspections or work, ideally every five years".3 The timing of a top up is in how often does a roof need treating?

In plain terms The first clean of an oven nobody has touched in years takes an afternoon. Wiping it down every few months takes minutes, and it stays looking like an oven.

What pressure cleaning and soft washing cost later

We do not price other businesses' work. The people who make the roof say what a jet costs it, and every method compared sets out the rest.

  • The surface. Monier "strongly advises against the use of pressure washers for roof cleaning".3 Marley, the UK tile maker, says high powered jet washes "can damage the surface of the slate or tile, thus reducing its expected life considerably".5
  • The warranty. Monier's tile warranty does not cover damage caused by "incorrect cleaning including cleaning with unsuitable chemicals or pressure".6
  • The next round of growth. In accelerated algal fouling tests on cement mortars, the fouling rate was governed by the roughness and porosity of the material.7 A surface a jet has opened up gives the next growth a better start.
  • Asbestos cement. High pressure water on an asbestos cement roof is prohibited in WA, and WorkSafe WA says "Clean-up costs of between $7,000 and $50,000 have been reported."8 We generally do not treat asbestos cement roofs; an asbestos professional is the first call.
  • The respray that follows. Where a pressure clean leads on to a pigmented respray, Monier says "respraying your roof is aesthetic only and will not repair your roof"9, and repainted concrete tiles "must be redone every five years or so to maintain the look".3

A soft wash is a bleach solution sprayed on at low pressure and rinsed off. The American asphalt roofing makers say it lightens algae staining and that "The effectiveness of such cleaning is only temporary, and the discoloration may recur."10 30 Seconds says its bleach based Outdoor Cleaner does not treat lichen.11 Bailiff goes on through a low pressure pump too, but stays on to soak into the growth, and is priced as above.

A Colorbond or Zincalume roof is priced the same way, from its measured area, and treated with Bailiff from the roofline, where it works the same way it does on tiles. Where BlueScope allows waterblasting its prepainted steel, for severe swarf staining, it calls for "a pressure not exceeding 400psi (2760kPa)"12; Kärcher's K 5 Premium home pressure washer is rated to 2,300 psi.13 More in can you pressure wash a Colorbond roof?

In plain terms A jet on a tile is steel wool on a non-stick pan. It comes up clean today, and everything sticks to it a little more from then on.

What this means for your roof

What you pay for is the growth ended where it sits, on every face, with no jet on the tiles and nobody walking them, and a photo and a twelve month check behind it. For a first treatment with Bailiff, that starts at $539 including GST, built from your roof's measured area. Staying treated with Sentry after that is the routine part, priced off the address when it is due, and it takes nothing off the roof: how to stop moss growing back explains why. Weighing it up against doing nothing? Read is roof cleaning worth it? And if you have been quoted for a respray, what a roof restoration costs in Perth sets out what that price buys.

Also asked

How much does it cost to remove moss from a roof?

With us, from $539 including GST for a first treatment with UNGROW Bailiff, built from the roof's measured area, the same as for lichen, algae or mould. Bailiff ends the moss where it sits, and it dies back and weathers off over the months that follow, some of it into the gutters, which are worth clearing after the first winter. Nobody scrapes it off, so nobody walks your roof.

How much does it cost to pressure wash or soft wash a roof?

We treat at low pressure instead, from $539 including GST, and we do not quote other businesses' prices. What a jet costs the roof, the tile makers say themselves: Monier strongly advises against pressure washers for roof cleaning, and its warranty does not cover damage from cleaning with unsuitable pressure. On an asbestos cement roof in WA, high pressure water is prohibited. A bleach soft wash, the American asphalt roofing makers say, only lightens algae staining for a while.

How much does roof maintenance cost?

On a tiled roof, upkeep is three things: the growth kept treated, the gutters and valleys cleared at least once a year, and a roofer's inspection, which Monier recommends ideally every five years. Our part is the first. A first treatment with UNGROW Bailiff is from $539 including GST, and top ups with UNGROW Sentry, our preventative, are priced off the address when they are due. The gutters and the inspection are other people's jobs. The full list is in what does roof maintenance include?

How much do zinc strips cost?

We do not price zinc strips. What decides what they cost you is the fitting and how long they last. Oregon State University's guidance, quoted by the University of Washington, puts a strip along each side of the ridge caps, with a nail down each foot, which means working along the ridge. It says most brands are effective for up to a year, below the strip only, once existing moss is removed. Sentry, our preventative, goes on every face from the roofline. More in do zinc strips stop roof moss?

How much does it cost to get a roof checked?

For our price, nobody has to come out. We measure the roof from aerial imagery of the address and send a fixed price, with no site visit and no need to be home. A roofer's inspection for cracked or slipped tiles and broken ridge mortar is a separate job, priced by the roofer. Monier, the tile maker, recommends one ideally every five years.

How much does it cost to clean or pressure wash a Colorbond roof?

We treat Colorbond, priced from its measured area, the same as a tiled roof, with the same set additions. A first treatment with UNGROW Bailiff is from $539 including GST, applied from the roofline at low pressure, and it works on steel the same way it does on tiles. Where BlueScope allows waterblasting its prepainted steel, for severe swarf staining, it caps the pressure at 400 psi; Kärcher's K 5 Premium home pressure washer is rated to 2,300 psi. We do not quote other businesses' prices. More in can you pressure wash a Colorbond roof?

On the record

  1. Consumer Protection, Government of Western Australia, Estimates, quotes and deposits (2026)
  2. Wet & Forget Australia, Roof cleaning information
  3. Monier, Roof cleaning and maintenance
  4. Scanning, Evaluation of the effect of lichens on ceramic roofing tiles by scanning electron microscopy and energy-dispersive spectroscopy analyses (2005)
  5. Marley (UK), Can I clean or jet wash my roof tiles?
  6. Monier Roofing (CSR Building Products), Warranty: Concrete Roofing Products (July 2026) (2026)
  7. The Science of the total environment, Bioreceptivity evaluation of cementitious materials designed to stimulate biological growth (2014)
  8. WorkSafe WA, Safety alert 12/2018: high pressure water cleaning of asbestos cement prohibited
  9. Monier, FAQs
  10. Asphalt Roofing Manufacturers Association, Algae discoloration of roofs
  11. 30 Seconds Australia, Outdoor Cleaner
  12. BlueScope, TB-5 Swarf staining (2022)
  13. Kärcher Australia, Pressure washer K 5 Premium Power Control Home

Get a price

Start with the address.

We price it off the address. No site visit, no two hour window, nobody walking through your house.

  1. 01You send the address.
  2. 02We look at the roof and send you a fixed price.
  3. 03To go ahead, tap Accept on the quote. We call you to pick a day.
  4. 04We treat it and photograph it the same day.
  5. 05We check it against that photo at twelve months.
  • Fixed price
  • Fully insured
  • 12 month guarantee

NOTICE TO VACATE

To

Moss, lichen, algae, mould

Leave by

Over the next 3 to 18 months

Evicted from the roofline.

Roof treatment · Western Australia